What are the performance characteristics of fruit and vegetable beaters? How is installation and commissioning carried out?

Performance characteristics of fruit and vegetable beater:

The fruit and vegetable pulping machine has two forms: single-pass and double-pass, and the pulp residue is automatically separated.

Screen: cylindrical,

Aperture: A variety of apertures, can be selected according to user requirements.

Beating speed: 860 rpm (frequency conversion speed can be set)

Installation and commissioning of fruit and vegetable beater:

1. When the equipment is shipped, it should not be subjected to shock or severe vibration;

2. When installing the beater device, it is recommended to fix it with anchor bolts. When the ground quality is good, it can be fixed with expansion screws. After the device is completed, take out the internal organs of the machine and check that the spindle rolls sensitively and without jamming;

3. Give an appropriate amount of oil to the bearing seat to make the bearing smooth, and every shift in the future is like this; (Note: Change the oil of the housing frequently!) Operation: First, install the bearing, open the oil drain hole at the bottom of the seat, and drain all the dirty oil; Oil is then injected from the upper part of the housing.

After the power is turned on, the motor steering must be checked in the empty vehicle to ensure that the motor steering is consistent with the steering mark of the machine, and it can be driven and produced after it is correct.

Fruit and vegetable beater is a kind of food processing equipment suitable for pulping and removing residue of stone fruits, berries and nuts. Active separation of slurry residue means that it can be combined on the production line for assembly line operation and stand-alone production. All places that come into contact with materials are made of stainless steel and high-quality edible rubber, which has good corrosion resistance, will not contaminate the materials, and ensures food hygiene. The machine only needs to replace the screen of different specifications and adjust the lead angle of the scraper, which can change the different pulping speed to achieve satisfactory results.

Fruit and vegetable beater means that after the material enters the screen drum, due to the reversal action of the rod and the existence of the lead angle, the material moves along the screen drum to the outlet end. The trajectory is a spiral, and the material is rubbed by centrifugal force during the movement between the scraper and the screen drum. The juice and meat (which has become slurry) are sent through the collector from the sieve hole to the next process, where the skin and seeds are discharged from the other open end of the cylinder for separation.

Before operating the single fruit and vegetable beater, the user still needs to confirm that the fit on the bottom shank meets the specifications. After the lever is lowered, it is necessary to start the timer and then start the beating operation. First, a brief trial treatment can be performed, and it is confirmed that large-scale processing can continue without any problems. However, special attention needs to be paid to selecting the appropriate distance stage, and at the same time, the slurry should be taken out according to the specified amount for samples.

After use, special attention should be paid to cleaning the device. If there is a lot of residue inside, we can also try to wash it with a resin solvent. And in the process of cleaning, we need to pay special attention to the maintenance of the rubber grille, and also need to pay special attention to the internal situation of the equipment during the cleaning process, which is also conducive to the long-term use of the pulp beater and ensures our rights and interests.