The fruit and vegetable crusher has the characteristics of compact structure and convenient operation

The fruit and vegetable crusher is used to crush or grind various fruits and vegetables, such as apples, pears, pineapples, carrots, ginger, etc., especially vegetables with high fiber content, such as celery, spinach, cabbage, etc. In addition, it is also widely used to crush various waste materials for easy pressing and dehydration, and to crush fruits and vegetables.

Low noise, large output, low power consumption; Not entangled, not sticking to the knife, not clogged, not stuffed, for blade wear, the reverse direction is equivalent to a new machine. Compared with fruit and vegetable crushers, not only is the noise low, but also iron filings are generated due to the relative movement between the hammer head and the rotary table of the fruit and vegetable crushers, which is a defect of the juice industry. For most juice industries, filtration technology is used, but for fresh juice, it is only a fatal injury because there is no subsequent filtration, And our company's pendulum crusher can effectively avoid this phenomenon. The crusher does not have a rotary table, and the pendulum moves independently without relative motion.

Especially suitable for small and medium-sized fresh juice factories, it can not only press fruits but also vegetables. Due to the high-speed rotating pressure of the rotor, the crushed materials quickly pass through the sieve without blocking the sieve, resulting in an increase in production. Fruit and vegetable crushers and squirrel cage crushers can only pack the crushing opportunities of plant-based materials one by one, with a slow speed;

For certain materials, the screening can reach 0.5mm, and two crushers are used in series to achieve the effect of beating pulp without blocking the screen.

The fruit and vegetable crusher has the advantages of compact structure, convenient operation, and overload protection device. It can not only be easily combined with our printing machine, but also be used separately.

Sandblasting treatment, beautiful appearance, modularization, no sanitary dead corners, especially easy to clean.

How to properly maintain the hydraulic system of fruit and vegetable crushers?

The main advantages of fruit and vegetable crushers are high yield, low cost, exquisite structure, simple operation, low maintenance cost, wide application range, and high utilization rate. Among them, hydraulic cone crushers are improved on the basis of traditional cone crushers, with large crushing capacity and high production efficiency. The key is the hydraulic system. So how to maintain the hydraulic system of fruit and vegetable crushers?

How to properly maintain the hydraulic system of fruit and vegetable crushers?

In order to ensure the cleanliness of the cone crusher, there is a large amount of dust generated during ore processing. When using it, attention should be paid to dust removal to prevent water from entering the hydraulic oil.

To ensure the cleanliness of the hydraulic system, it is recommended to use the same type of hydraulic oil for cleaning, otherwise it may cause damage to the cone crusher.

When replacing hydraulic oil, pay attention to using a filter when adding hydraulic oil, and ensure the cleanliness of the filter. When adding oil, it is necessary to use an appropriate amount and follow the specified oil level range.

4. Pay attention to the replacement time of hydraulic oil. It is recommended to replace the cone crusher shortly after the cone crusher stops and the hydraulic oil is still very hot. This is beneficial for the clean discharge and sedimentation of the oil, and then inject new hydraulic oil.