Chengxun fruit and vegetable processing products, from material selection, production, quality inspection to after-sales service, are strictly implemented in accordance with the appropriate plan to ensure that customers are willing to choose to cooperate with Chengxun again and again because of Chengxun's excellent product quality and good after-sales service. The young Chengxun also hopes to realize his dream of becoming a century-old enterprise through this way of development.
This machine is suitable for half cutting and pitting of apricots, which is the key equipment for the production of preserved apricots, apricot pulp and apricot jam.
View Details
Stainless steel ginger crusher
The material flow part of the machine is made of all stainless steel 304. The rotor has a fixed blade and bedknife combination. Suitable for crushing ginger Production capacity: 2T/h Equipped power: 3Kw
View Details
Suitable for crushing dry and brittle materials and ginger and garlic Processing capacity: 100-200kg/h Grinding particle size: 60-120 mesh Equipped with power: 4kw Dimensions: 710×520×1450mm
View Details
Working principle: The material is lifted into the hopper, crushed by the screw feeding sleeve and enters the crushing area. Under the action of centrifugal force, the material rotates with the scraper on the rotor. Because there is a knife row on the stator, the material is crushed during this process and reaches a certain particle size. , the material is discharged from the waist-shaped or circular hole on the stator, and is pumped into the next process by an additional single-screw pump with a screw propeller. Two levels of safety protection on the side cover. The double-sided tooth structure of the knife row can be used on adjustable sides. The size of the output particle size depends on the size and shape of the hole on the stator.
View Details
This machine is mainly used for crushing fruits and vegetables. There are side cover, flying knife, screen, fuselage, main shaft and other components. The whole machine is composed of feed hopper, side cover, body, main shaft, bearing seat, motor, frame, discharge hopper and so on. When working, the motor drives the main shaft to rotate at a constant speed through a pair of pulleys, and a flying knife is installed on the main shaft to rotate at high speed. The material falls into the hopper freely from the elevator, and is chopped by the high-speed rotating flying knife. Due to the action of centrifugal force, the material falls into the separate storage tank through the screen with waist-shaped holes, and then pumped by the feeding pump. Into the next process. The advantage of the hammer crusher is that the particle size of the crushed material is consistent, and its size is determined by the screen with waist-shaped holes. hammer
View Details
The working parts of the machine are composed of six scraper rotors and screens. The pumped solid-containing material is separated by centrifugal force under the action of the spiral scraper. The undersize is the refined slurry, and the oversize is automatically discharged from the slag outlet. The machine has adjustable rotation, stator clearance and helix angle, and is mainly used for beating and refining citrus juice.
View Details
The equipment is used for filtering liquid materials, works continuously, and the filter screen is easy to replace.
View Details
HWF Series Stainless Steel Horizontal Centrifuge
The integral casting machine base is suitable for the separation of professional bad liquid in the brewing industry and the separation of juice dregs of fruit and vegetable juice in the beverage industry.
View Details
Apple peeling, poking, core cutting machine
Machine size (mm): 298x702x414 Production capacity (pcs/min): 10 (60-100 kg/h) Apple size (mm): 30-90 Poke core size: optional Splitting: optional 4, 6, 8 petals Or no split motor power: 180W Note: This machine can operate two sets by one person
View Details
The machine is mainly composed of box body, curved net, storage tank and so on. The medium containing solids is pumped into the top of the tank by the pump, and flows through the arc-shaped net after overflowing. The solids are intercepted, and the fluid enters the storage tank through the arc-shaped net for recycling. The curved mesh gap is 0.75mm.
View Details
Mino plate stainless steel mixing tank
This equipment is vertical cylindrical, with conical head, external steam heating jacket and ultra-fine glass wool insulation layer with a thickness of 50mm, and a fully enclosed container. It is mainly used for heating and stirring liquid in industries such as fruit juice beverages, dairy products, and pharmaceuticals. . This equipment is composed of liquid storage container, manhole device, thermometer, liquid level gauge, stirring device and so on. The inner tank of the equipment is all made of 304 stainless steel 2B plate, and the inner and outer surfaces are polished; it is welded by argon arc, and the inner wall is smooth without unevenness or dead ends; the outer jacket is stainless steel Mino board, which is welded with the inner tank to form a steam chamber. The steam inlet and outlet of the equipment are equipped with stop valves, safety valves, steam traps, etc. Equipment system
View Details
Single layer stainless steel mixing tank
This equipment is a vertical cylindrical cone-bottom container, which is mainly used for storage, blending and mixing of feed liquid in fruit juice beverage, dairy products, pharmaceutical and other industries. It consists of liquid storage container, agitator device (reducer and agitator), manhole device, spray device, thermometer, liquid level gauge, operation ladder, etc. The whole set of equipment is made of 1Cr18Ni9Ti stainless steel 2B plate except the reducer, and the outer surface is treated with film; it adopts argon arc welding, the inner wall is smooth, and there is no unevenness or dead angle; the weld seam is ground, polished, and treated with plastic polishing. After the equipment is manufactured, the water pressure test is adopted. The upper part of the tank adopts an openable lid,
View Details
Stainless steel shell and tube sterilizer, preheater, cooler
The equipment is used for heating or pasteurization of materials conveyed by screw pumps and beverage pumps. Production capacity: 0.5, 1.5, 2, 4, 6, 8T/h. Materials flow back and forth three times. Stainless steel safety insulation layer. Discharge temperature: 90~95℃.
View Details
Stainless steel spiral blanching machine
Uses: The continuous preheating blanching machine is one of the raw material pretreatment equipment in fruit and vegetable processing. It can prevent browning, inhibit active enzymes and decompose pectin to improve the juice yield by precooking. Output: 10t/h Spiral diameter: 1000mm Equipped with power: 7.5kw, the main power is continuously variable transmission Precooking temperature: 95～98℃ (with temperature control device) Precooking time: 5～8min (adjustable) Steam consumption : 680Kg/h (pressure: ≤0.2MPa) Dimensions: 5000×1500×2200mm Host structure: consists of power transmission part, conveying screw, discharge bucket, screen
View Details
This machine is mainly used for crushing fruits and vegetables. It is composed of machine body, cutterhead, pusher screw, spindle and so on. It is characterized by large production capacity, consistent particle size of materials, stable operation and low noise during work. After the material enters the hopper, the material is squeezed into the grinding area of the cutter head by the pusher screw, and the ground material is thrown out by the centrifugal force through the side groove of the knife row and falls into the lower groove.
View Details
This machine is mainly used for depitting stone fruits such as peaches and apricots at room temperature. It is one of the key equipment in the pulp production line of stone fruit. The core of peaches and apricots is removed by rotating toothed rollers and rubber rollers to obtain lumpy pulp. The distance between the two rollers depends on different fruits. The fruit is sent into the hopper by the front equipment, and the fruit pressing plate is driven by the crank connecting rod mechanism to press the fruit into the gap between the two rollers. The two rollers rotate against each other, most of the pulp on the fruit is pressed into the gap between the toothed rollers, the fruit core is squeezed into the elastic rubber roller, and the comb board digs out the pulp from the gap between the toothed discs. The core with pulp enters the core washing part to complete the separation of the core.
View Details
Telephone:
Mailbox:
Address:
Xinqiao Industrial Park, Jingjiang City, Jiangsu Province
Fax:
+86-523-84320678,84310678
Chengxun fruit and vegetable processing products, from material selection, production, quality inspection to after-sales service, are strictly implemented in accordance with the appropriate...
Online message
Copyright©2023 Jiangsu Chengxun Technology Co., Ltd.
